Frequently Asked Questions:
The garage dimensions given are external dimensions. There is always a tolerance of a few centimeters, because the garages are bolted together, the actual size may slightly differ from the ordered size. However, the difference does not exceed a few centimeters.
The area for the garages must be leveled and leveled. We prefer a spout with enlarged dimensions of about 20 cm. Alternatively, concrete blocks can be laid out and leveled (e.g. paving tiles, brick).
There is a 1 year warranty on the steel structure. We base the warranty on a VAT invoice or payment confirmation issued by a driver.
I can order the garage:–by phone–by email–by website.
Instillator’s have a power generator with them, so there is no need for electricity.
The garage structure is not galvanized as standard. We only paint it with a primer paint. After assembly, it requires every customer to paint the structure with a topcoat. Alternatively, for an additional fee, the construction can be made of galvanized sections, then topcoat paint should protect the welding points.
Installation of the gate consists in inserting it into the hole prepared earlier by the customer. Then the gate is fixed to the wall with dowels and foamed. The assembly service does not include dismantling the old gate.
Each order is confirmed by phone a few days before delivery. Then all the details are confirmed in the telephone conversation. After confirmation by phone the order goes to production and it is final.
We always set the door opening direction when standing outside the building (garage) and looking at the door. Then if the hinges are on our left side, then the door is left, while if the hinges are on the right side then the door is right. It applies this principle both to the door opening outwards and inwards.
We use aluminum rivets to fix the acrylic sheet on the garage construction, because they are stronger than colored rivets. After installation, the customer must remove the protective film on their own.